Flytec 6020 * Manual do Utilizador

Operating Manual Flytec 6020 6020 GPS Operation Manual Vers.3.05 Flytec AG Ebenaustrasse 18 , CH – 6048 Horw Swi

Operating Manual Flytec 6020 1.5 User defined fields The main screen as well as the final approach screen each show up to 3 pages which are shifted

Operating Manual Flytec 6020 By pressing the ► key the cursor moves to the next letter position etc. By using the F1 key it is possible to shift betwe

Operating Manual Flytec 6020 2 Display Screens 2.1 Altimeter and air pressure A barometric altimeter calculates altitude from the present air pressu

Operating Manual Flytec 6020 Pressing the ▲key will increase the displayed altitude, the ▼ key will decrease altitude. Due to this adjustment the ai

Operating Manual Flytec 6020 2.2 Variometer functions 2.2.1 Analog Vario The most important indication for a non-motor driven aircraft is without any

Operating Manual Flytec 6020 2.2.3 Acoustics and Volume Level (Sound) The Menu Climb acoustics facilitates the versatile setting possibilities of th

Operating Manual Flytec 6020 damp Dampening The Variometer value is recalculated every 0.2s. In case of rapid Vario changes and setting of quickly i

Operating Manual Flytec 6020 Main Setup Menu ⇒ User Settings ⇒ Variometer ⇒ Basic filter . Filter type Depending on the condition, if the air is qui

Operating Manual Flytec 6020 negative value, if it is at the West. Time zones with 0.5h UTC Offset are also adjustable. These settings are effected in

Operating Manual Flytec 6020 Because the receiving intensity of the satellite signals is only approx. 1/1000 of mobile radios, any radio equipment an

Operating Manual Flytec 6020 Table of Contents 1 Table of Contents...

Operating Manual Flytec 6020 NORTHWPT2 WPT1 DTK Course Track Bearing Distance Crosstrack errorCourse errorSpeed Caution: Track o

Operating Manual Flytec 6020 2.6.4.1 Waypoints - alter, delete or insert Waypoints -------------- Flytec Fiesch In this position of Setup-Menu the

Operating Manual Flytec 6020 your location after landing to some person who will retrieve you from there. The coordinates are also displayed when ente

Operating Manual Flytec 6020 2.6.5 Flying Routes A route is an arrangement of various waypoints. The waypoints used on a Route need to be saved in th

Operating Manual Flytec 6020 Now at this point the individual waypoints need to be inserted into the Route. After pressing the key F1 (lns.Wayp), the

Operating Manual Flytec 6020 COMPETITION-ROUTE ================= Flytec 0.4S Fiesch 0.4 Flims, Station 0.4 Cassons Grat 0.4 Stanserhrn-Arv 0.4

Operating Manual Flytec 6020 EXIT Cylinder WP1 Exit WP2WP3 The signal „waypoint reached“ is audible as soon as the start time is reached an

Operating Manual Flytec 6020 During a flight the pilot can see on the Info-field display via count-down how many seconds / minutes are left before ope

Operating Manual Flytec 6020 2.6.6.4 Dist to Goal (Total distance to the Goal of a Route) In this field there is displayed during flight of a Route

Operating Manual Flytec 6020 2.6.8 Relocating Thermals With weak or widely dispersed thermals this function helps to relocate any lost thermals. A sm

Operating Manual Flytec 6020 9.2.2 Stall alarm...

Operating Manual Flytec 6020 CTR’s can be entered into the instrument either manually in Main Setup Menu ⇒ Airspace, or with less effort by assistance

Operating Manual Flytec 6020 To enter arc segments, then the following sequence must be observed: Long, Lat centre; Long, Lat start point of arc segm

Operating Manual Flytec 6020 2.7.4 Glide ratio ( = L/D ratio) By definition, the glide ratio is calculated by taking the horizontal distance trave

Operating Manual Flytec 6020 subject to modification. Furthermore the glide ratio for best glide as entered into the instrument settings must be corr

Operating Manual Flytec 6020 Best glide 8Act. distance to goal 5.45 km Best glide –exit point 931m over the goal act. height 956m Alt a

Operating Manual Flytec 6020 2.8 Battery - Management Two Bargraph scales show the charge state of the batteries. The Flytec 6020 is provided with 2

Operating Manual Flytec 6020 3 The Setting Menus Prolonged pressing of the OK key gives access to the setting mode. With the arrow keys▼ and ▲ one o

Operating Manual Flytec 6020 3.2 Memory Management Delete all Flights Deleting the entire flight memory. This command reformats the flight memory, wh

Operating Manual Flytec 6020 3.4 Specific Instrument factory settings This default value, which is not accessible to the pilot, contains all basic s

Operating Manual Flytec 6020 For tests or acrobatic flights a sampling rate of 2 seconds is recommended. However, the recommendation as standard setti

Operating Manual Flytec 6020 1 Table of Contents 1.1 The Instrument SD card slot for future applications jack for Windspeed -sensor No

Operating Manual Flytec 6020 4.1.1 Logbook and Flight Analysis page FLIGHT-ANALYSIS Date: 24.09.04 Start: 06:19:06 Stop: 06:27:56 Fltime: 0:09:04

Operating Manual Flytec 6020 4.2 Data transfer In the memory of the 6020-GPS are saved all data entered by the pilot, such as waypoints, Routes, pilo

Operating Manual Flytec 6020 4.3.1 Fightinstrument Option All settings can be set or changed comfortably with Flychart 4.52 WaypointsAirspaceUser

Operating Manual Flytec 6020 After decompressing the ZIP file a number of files are created. Double clicking on the file “Flasher.exe” starts the pro

Operating Manual Flytec 6020 6 Simulation After choosing the Simulation mode in the Setup Menu and pressing the OK key, you have access to this high

Operating Manual Flytec 6020 7.1 Landing in Water In case you are forced to land in water with your 6020-GPS and it may have penetrated the instrume

Operating Manual Flytec 6020 9 Appendix 9.1 Altimeter An altimeter is really a barograph because it doesn’t directly measure altitude, but air press

Operating Manual Flytec 6020 The physics could be pictured as follows: In order to create a certain lift a certain number of air particles need to hit

Operating Manual Flytec 6020 an altitude limit to be adjusted by the pilot in Main Setup Menu ⇒ User Settings ⇒Speed ⇒Stallspeed above which the stall

Operating Manual Flytec 6020 Earth radius =6360km Satellite orbit radius =26560km The position is derived from a triangulation. The GPS receiver m

Operating Manual Flytec 6020 1.2 Switching ON and OFF the 6020-GPS The instrument is switched-on by pressing the Page/ESCOn/Off key. In order to avo

Operating Manual Flytec 6020 Time difference Satellit 1 Satellite 1 Satellite 2Almost no time difference Satellite 2 Position A Position B

Operating Manual Flytec 6020 9.4 Flight optimisation 9.4.1 Final glide calculation Here the GPS-Data and the McCready theory go hand in hand. Princi

Operating Manual Flytec 6020 On the one hand one will climb for safety reasons somewhat above the path of best glide. On the other hand one will climb

Operating Manual Flytec 6020 9.5 Flight Memory and IGC File 9.5.1 Content of IGC Files In the IGC File are saved all important data of a flight in

Operating Manual Flytec 6020 Select standard format for columns The present head in lines 1 – 13 contains internal flight data. These are no longer r

Operating Manual Flytec 6020 that even pre-flight events are included in the recording. The Barogram is also included in the IGC-File which is gene

Operating Manual Flytec 6020 Arrow key functions in normal mode Main-, Map-, final- approach screenOn/Off -switch(for "Off" keep pressed d

Operating Manual Flytec 6020 Map Screen Defined Air Space Waypoint in a Route with cylinder Defined Air Space (not yet available) Waypoint in

Operating Manual Flytec 6020 Final approach screen Number of Satellites received by GPS This line points to goal (Bearing) Charge state of battery

Operating Manual Flytec 6020 1.4 First steps 1.4.1 Prior to the first flight page Entry of pilot’s name, type of aircraft and number 10, 11Select